Specification:
Positioning system: Optical flow/ Barometer/ Laser
Height positioning: Laser/ Barometer
Position locating: Optical flow (effective height 0.3-3m)
Accuracy of auto-hover: Horizontal ±0.2m, vertical ±0.3m (under no wind environment)
Receiver protocol: Frsky D8
Quad: Cetus Pro Brushless Quadcopter
Frame: Cetus Pro Brushless Whoop Frame
Flight controller: Lite 1-2S Pro brushless FC
VTX: 25mW
Camera tilt degree: 30°
Camera: C02 FPV Micro Camera
Transmitter: Literadio2 SE Transmitter
TX mode: Mode 1 & Mode 2 optional
Goggles: VR02 Goggles
Motor: 1102-18000KV Brushless motor
Propeller: 40mm 3-blade 1.5mm shaft hole
Takeoff weight: 33.19g (without battery)
Power system: 1S
Battery*: BT2.0 450mAh 1S 75C Battery
Flight time: 4-5min
Flight distance: 80m (in wide & undisturbed environment)

Note: The battery will be upgraded from BT2.0 450mAh 1S 30C Battery to BT2.0 450mAh 1S 75C Battery from Feb 2024.

The Cetus Pro FPV Kit is finally here! It is the best ideal choice for beginners to advance currently. Comes with a Cetus Pro brushless quadcopter, LiteRadio2 SE transmitter, and VR02 FPV Goggles, it's more powerful and maneuverable for all starters as well as FPV pros to practice indoor and outdoor.

Bullet Point: 
* The Cetus Pro FPV Kit auxiliary flight function is greatly reducing the threshold of operating. This is the lightest key to open the door to advanced FPV. 
* Cetus Pro FPV Kit quadcopter comes with a brushless power system, it's more powerful and maneuverable in flight. Pilots can achieve more FPV freestyle actions to train.
* Cetus Pro FPV Kit With the self-protection of emergency landing when out of control or in low battery, to ensure a more safe flight. 
* Cetus Pro FPV Kit Made of PA12 material, the frame has an excellent impact resistance in drop & impact. Meanwhile, the 360° protection of the whoop frame ensures safe flights both indoors and outdoors.
* Cetus Pro FPV Kit All items needed for the flight are packed in an EVA portable storage bag. Better to protect and convenient to carry. 

Altitude Hold, Easy to Fly： 
The Cetus Pro FPV Kit altitude hold function enables Auto-Hover. This quadcopter can stay at a current height when pilots' hands are off the transmitter. Barometer/laser achieves accurate and stable positioning, which makes the quad hovering indoors very stable. The flight has never been so easy for a beginner! 

The altitude hold function is only available in N mode.

Self-protection, No More Dangers：
The Cetus Pro FPV Kit comes with an excellent self-protection function. It can make an emergency landing whenever loses control or is in low battery. It will also automatically disarm and drop on the ground once there is a strong collision with the object. Let's say goodbye to loss and crash!

Turtle Mode, No Burden to Fly Away：
When the Cetus Pro FPV Drone falls to the ground and upside down, we can active turtle mode by LiteRadio2 SE transmitter to flip it over and resume flying. With this function, there is no need to walk away to correct the position manually.
Turtle mode will not work effectively if something gets stuck in the motor/prop. Please push down switch SD on the transmitter immediately in this situation to exit turtle mode. 

3 Flight Modes, From Zero to Hero:
Cetus Pro FPV Kit Three modes those N/ S/ M are available, which can satisfy the different needs of pilots and adapt to various flight environments. Whether you're a seasoned FPV pilot or a complete beginner, the Cetus Pro FPV Kit helps anyone fly confidently from day one. These 3 flight modes can be switched by one SB switch on transmitter, which is simple and convenient. Meanwhile, all modes support 3 different speeds with SLOW/MID/FAST, pilots can switch it by one SC switch on the transmitter.

Cetus Pro Brushless Quadcopter：
Cetus Pro FPV Kit Equipped Lite 1-2S Pro brushless flight controller with 12A ESC, matching with 1102 18000KV brushless motors and 40mm 3-blade props, which is absolutely more powerful and maneuverable. Turtle mode greatly makes FPV racing training smooth and convenient.

FPV Simulator Supported：
LiteRadio2 SE radio transmitter can be used as a USB Joystick when connected to the computer. So it's available to play FPV simulators like EREADRONE, LIFTOFF. More convenient for practicing and charging at the same time. Besides, the transmitter is more ergonomic with a hobby-grade gimbal and adopted the rubber coat.

New to FPV? No worries. Our new Cetus Pro FPV Kit will take you from zero to hero in no time.
This is a very different drone from BETAFPV. It's a brushless whoop drone designed from the ground up for FPV beginners. With three modes, you can start your FPV journey at a stable, basic level – and then progress. If you’ve ever felt that FPV is too difficult to tackle, this is the solution for you.

Click here to know more about LIFTOFF.

Download LIFTOFF.

Note: This radio transmitter isn't compatible with Windows 11/Windows 10 systems running on AMD CPUs. If you wanna connect to a simulator, you will need to revert it to the ELRS 2.0 firmware.

VR02 FPV Goggles：
VR02 FPV Goggles- the First-Person-View Goggles with the simpler operation and powerful function, is specially designed for FPV starters. It comes with built-in 5.8G 14DBI high-quality antennas, you can receive stable and clear images even for long-range flights. Adopt an ergonomic design with a foam sponge faceplate and a three-sided adjustable headband, it fits your face and head perfectly.

Cetus Pro+550mAh Battery*4+6-Hole Charger Package List：
1 * Cetus Pro Brushless Quadcopter
1 * LiteRadio2 SE Transmitter (Frsky D8 Protocol)
1 * VR02 FPV Goggles
2 * BT2.0 450mAh 1S Lipo Battery + 4 * BT2.0 550mAh 1S Lipo Battery
1 * BT2.0 Battery Charger and Voltage Tester
1 * 6 Ports Charger
1 * USB Charging Cable (Type-C)
1 * Type-C Adapter
1 * Prop Removal Tool
4 * 40mm 3-blade Props
2 * User Manual
1 * Portable Storage Bag

Cetus Pro Package List：
1 * Cetus Pro Brushless Quadcopter  
1 * LiteRadio2 SE Transmitter (Frsky D8 Protocol) 
1 * VR02 FPV Goggles   
2 * BT2.0 450mAh 1S 75C Battery
1 * BT2.0 Battery Charger and Voltage Tester
1 * USB Charging Cable (Type-C)
1 * Type-C Adapter
1 * Prop Removal Tool
4 * 40mm 3-blade Props
2 * User Manual
1 * Portable Storage Bag
1 * Phillips Screwdriver