• Model: EX86010-CJ
• Scale: 1/10
• Drive: 4WD
• Body shell material: PC
• RGT EX86010 Wheelbase: 28.5cm
• RGT EX86010 Chassis height: 8cm
• RGT EX86010 Gear Ratio: 56.6:1 & 33.3:1
• RGT EX86010 Motor: 17T RC550 Brushed
• RGT EX86010 ESC: RGT-60A Waterproof
• RGT EX86010 Servo: 15kg Waterproof
• RGT EX86010 Speed: 15km/H
• RGT EX86010 Battery: 7.2V 2000mAh NI-MH, T-plug (the ESC compatible 2S lipo battery, just need to switch the ESC to lipo mold)
• RGT EX86010 Running Time: About 25mins
• Charge time: 3H
• Frequency: 2.4 GHZ
• Proportional control: proportional control
• Transmitter Battery: 4 X 1.5V AA(Not Included)
• R/C Distance: About 150m
• Size: 50X23X26cm
• Weight: 3 KG

Feature:
1. RGT EX86010 CJ is 1/10 all-terrain four-wheel driver ealistic off-road vehicle,is the vehicle that RGT team intend to launch this time.
2. The CJ optimize and shorten the wheelbase on the (EX86110) platform,with the chassis structure basically unchanged.The RGT EX86010 wheelbase is adjusted to 285mm,and the front bumper adopts metal anti-crash design.The winch mounting hole is reserved,which could realize the non-destructive installation.There are part of CJ is equipped with a full-size spare tire. The whole car employ ball bearings, C-shaped steel beam chassis,and front and rear axle locking spools. The steering arm is designed with a high-position tie rod, which is matched with CVA steering of a high-strength ball cage,and can achieve a super-large steering angle of 41 degrees.Later on,an aluminum alloy upgrade steering arm with a 45-degree steering angle will be introduced by the factory.The CJ have the motor front-mounted design,and split transmission and deceleration system.The main gear of the reducer comes with the slipper design, and the gears of the transmission system are all high-strength powder alloy gears,which solve the problem of tooth sweeping under the condition of super-strong resistance load. CJ is still in RTR version for the players,equippedwith17TRC550 super-strong torque motor,RGT-60A waterproof ESC,15KG high-torque waterproof servo,and 7.2V 2000MAH NiMH battery.The 4-channel remote controller is specially designed for Crawler,supporting the third channel control the light switch, and the forth channel control the winch retracting function.The biggest high light of CJ is that the approach angle and the departure angle are nearly 90degrees,not afraid of any road conditions.The design of the body shell is full of carefulness and attentiveness,as the simulated steering wheel,the seat,the handbrake, the windshield and the rear-view mirror are all available.
3. Such a beautiful RGT EX86010 CJ must be a perfect off-road vehicle,which could be appreciated when rest, and traverse when operation.
4. RGT EX86010 newly designed steering arm uses a high-level tie rod for steering, avoiding the limit of Block C, and can achieve a super steering angle of 41 degrees with great CVA part.
5. RGT EX86010 design of split transmission and deceleration drive system, more stable low-speed torque output.
6. RGT EX86010 Reducer with slipper Main gear, metal transmission gear, metal split transmission box gears
anti-dropping ball cage CVA, made by 45# steel, durable and in anti-dropping design.
7. RGT EX86010 chassis design is simple and clear, pursuing the rationality and convenience. To provide more practical and convenient for player, the wiring slot on the ESC installation Box and the Receiver Box are very special and easy for the player to add light lines and winch lines in future.
8. RGT EX86010 CJ body shell,made of imported PC material and molded by injection process,is very bright and have strong resistance feature.The blister process is also used for the plastic steering wheel,the seat,the hand brake.The rear-view mirror are exquisitely made.The transparent PC windshield shows very good simulation effect.

Note:
The winch is not included.

Package included:
1*RC Car
1*Controller
1*Rechargeable battery(built-in)
1*Charger