CROSSRC UT4 PRO Tiger Shark 1/7 RC Car Climbing Car Crossover High-speed Off-Road Vehicle RC Car

New for the ever growing rock crawling scene is the giant 1/7th scaled CROSS RC UT4 Pro. The UT4 Pro brings a tough new Ultra 4 look to the Cross RC stable and is large enough to get over seriously large rocks. The CROSSRC UT4 Pro sports 2.6″ sized wheels to go along with all its scale goodness.

Specifications:
* Brand: CROSSRC
* Model: UT4 PRO
* Length : 613 mm
* Width : 327 mm
* Height : 272 mm
* Wheelbase : 417 mm
* Front axle ground clearance : 70 mm
* Center ground clearance : 78 mm
* Rear axle ground clearance : 54 mm
 
Packing size: 82*36*36 CM
Packaging weight: 8.7 KG

Note:
1. The RTR version is already assembled, including HOBBYWING 880 Brushed ESC, 775 Brushed Motor, 25KG Servo, 3 mini servos, 6CH Remote Controller. Batteries and chargers need to be purchased separately
2. The ARTR version is an empty frame that has been assembled, and does not include any electronic equipment. Players need to purchase ESC, Motor, Servos, Remote Controller, batteries and chargers separately

The first generation of UT4 began in mid-2020 and has gone through a special period. So far, the pursuit of power and the way of playing of simulation model players have undergone tremendous changes. Through targeted strengthening and transformation of the transmission system, continuous exploration and upgrading of materials, and structural strengthening of brushless power. After 18 months of brutal testing of multiple sets of power, the 2024 CROSSRC UT4 Pro has been tempered and reborn.

The 2024 CROSSRC UT4 Pro is designed as a comprehensive crossover model. The front wheel double wishbone independent suspension, the rear wheel adopts a four-point lower blade arm integral hard bridge, the original car is equipped with a mid-mounted two-speed gearbox, and a front and rear differential lock system. Let you simultaneously realize the crossover experience of crossing the ash and climbing the dangerous peaks.

Battery: XT60 11.1V 50C 3S 5200mAh Battery (optional)
Charger: SKYRC MAX B6AC 80W Balance Battery Charger  (optional)

The 2024 CROSS RC UT4 Pro adopts a pipe frame inlaid beam design, which combines the space of the load-bearing structure with the hard-core chassis performance of the non-load-bearing structure. The simulated cab space is designed with a complete instrument and control panel, which can accommodate a simulated racing driver; the front position has a simulated engine decoration; the rear axle four-link has a reinforced ball head buckle and an integral blade arm tie rod structure, so that the rear suspension forms a strong overall frame without losing the flexible twisting posture.

CROSSRC UT4 Pro front and rear differential assemblies use aviation aluminum CNC-carved cages to ensure that the gears will not jump due to axial force under high power. The differential case is made of aviation aluminum CNC, which effectively extends the service life of the differential lock teeth. The large and small bevel teeth are integrally cut and formed from special steel, which greatly improves the impact resistance during sudden acceleration and braking.

CROSSRC UT4 Pro using two-speed gearbox placed sideways in the middle balances the center of gravity of the vehicle and counteracts the one-sided tail collapse caused by the shaft effect during rapid acceleration. The gearbox uses all-metal gears and ABEC3-level long-life bearings, and can be maintained without disassembly unless it is immersed in water.

CROSSRC UT4 Pro RTR is powered by a custom 775 motor + HobbyWin 880 high-voltage ESC, with 21T motor gears as standard, and uses a 3S 5000mah 90C battery. The maximum speed is 30Km/H. (Speed measuring device: SKYRC GSM020)

CROSSRC UT4 Pro original car is equipped with a large-diameter all-metal CNC low-center-of-gravity hydraulic shock absorber, which is factory-set for climbing. The frame has a reserved position for installing a secondary shock absorber damping cylinder, which can be optionally installed to increase the vehicle's handling stability during high-speed crossing.

CROSSRC UT4 Pro using 2.6-inch lightweight clamped tires are equipped with 152mm diameter simulated MT tread tires, which can adapt to various complex road conditions. The 2.6-inch wheels also have a relatively rich CNC style for players to customize.

2024 CROSSRC UT4 Pro is available in two versions: RTR and ARTR (only the frame is installed without electrical equipment). Both RTR and ARTR are equipped with a Tiger Shark painted body and a controllable multi-mode high-power headlight system. RTR is equipped with a HobbyWin 880 ESC, a newly customized high-power 775 motor, a 25KG high-voltage steering servo and 3 high-voltage medium-sized servos (for shifting and front and rear differential locks), and a 6-channel remote control device.

Upgradeable catalogs available for simultaneous listing:
97400700 / UT4 action figure
97400701 / UT4 four-point seat belt
97400702 / UT4 auxiliary shock absorber (2 pieces per set)
97400704 / UT4 CNC wheel hub (2 pieces per set)
97400705 / UT4 CNC wheel hub decorative sheet (2 pieces per set, both original and CNC wheel hubs can be installed)
97400706 / UT4 CNC steering assembly
97400708 / UT4 CNC rear lower control arm (rear blade arm)
97400709 / UT4 CNC front upper A-arm
97400710 / UT4 CNC front lower A-arm
97400712 / UT4 CNC steering C seat
97400713 / UT4 CNC steering cup
97400793 / UT4 anti-roll bar
97400719 / UT4 CNC exhaust pipe trim kit